Sedona Programming for Niagara 4 Users
Contemporary Controls offers the N4 Sedona Driver for free use with our BACnet Open controllers to deliver a one-tool solution for your Niagara N4 (version 4.11 or later). The N4 Sedona Driver is licensed from Sedona community member, Ontrol, and is available for our Sedona controllers at no additional cost.
With the N4 Sedona Driver installed on N4 Workstation or N4 JACE, Niagara 4 can be used to communicate via Sedona (SOX) to Sedona devices to read/write their points. It can also be used to program the wiresheet on Sedona devices. You will need a running station in Workbench or a JACE that includes the N4 Sedona Driver. To program a Sedona device directly from your Workbench, you will need to run a station on your local PC. If the Sedona device is being programmed through a JACE, you simply open the station. In both cases, the station must be able to access Sedona kit and platform files. Installation instructions are available in the Application Note: How to Install and Use the N4 Sedona Driver.
To receive the N4 Sedona Driver, complete the form below. We will contact you for additional information via email, please check your spam and/or junk folders. Please allow 2-4 business days for processing.