I/O Modules Expanding the Number of I/O Points in the Field

BASautomation
  1. BASautomation
  2. I/O Modules

For those installations that require a fieldbus solution such as Modbus RTU/ASCII, BACnet MS/TP, ModbusTCP or BACNet/IP, Contemporary Controls provides solutions for expanding the number of I/O points in the field. Cost-effective Configurable I/O or Cube I/O modules are available with analog and digital inputs and outputs in varying combinations.

GC5 BACnet MSTP

BACnet MS/TP or Modbus RTU Configurable I/O

I/O with configurable inputs (temp, analog, resistance contact closure in a single point), retentive counters 100HZ, relay and analog outputs. A single module supports serial protocols of BACnet MSTP and Modbus RTU/ASCII.

GC5 BACnet IP

BACnet/IP or Modbus TCP Configurable I/O

I/O with configurable inputs (temp, analog, resistance contact closure in a single point), retentive counters 100HZ, relay and analog outputs. A single module supports both BACnet/IP and Modbus TCP.

Metz I/O BACnet

Cube I/O BACnet MS/TP

Modules are powered from a 24 VAC or VDC source. A four-pole terminal strip and a four-pole jumper block used for power and communication connections are shipped with each module.

Metz I/O Modbus

Cube I/O Modbus

Modules are powered from a 24 VAC or VDC source. A four-pole terminal strip and a four-pole jumper block used for power and communication connections are shipped with each module.